This is the Outer Wilds Ventures logo / patch from the game Outer Wilds. You can hang it on your wall.

Firstly, if you haven’t played Outer Wilds, stop reading this and go play it. Then come back here to thank me.

I am not very good at painting, so this design is split into lots of printable pieces. It also gives the end result a cool 3D effect. The trade-off is that you will have to glue everything together and print most parts with some thin supports.

You need 4x big stars and 4x small starts. PRINT DOUBLE WHAT YOU NEED. They are tiny and will fly off the print bed when you come to remove them. I lost what felt like 100 of the little b***tards.

I was able to print the 3 parts of the frame in one print, but the clearance between them is minimal so whether or not you can get away with this will depend on your printer.

Suggestion - Stars should be printed face down no supports. All other objects (aside from the frame and back plate) should be printed front side up with supports.