Toyota 4Runner Hitch Cover With 5/8" Pin Hole Remixed by ScottE

Remixed by

ScottE

Hobby & DIY>Vehicles

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

4.5 h

1 plate

5.0(1)

[PETG] 0.2mm layer, 2 walls, 15% infill

4.5 h

1 plate

2 colors, 0.2mm layer, 3 walls, 20% infill, AMS Lite

3.7 h

1 plate

Boost

Released

Description

Yet another Toyota 4Runner Hitch Cover - this one has a hole so it can be secured with a 5/8" hitch pin.

This is a dirty remix of the original model. It's “dirty” in that I just grafted an extension on without a whole lot of regard in making it perfect, hence there are visible lines where things aren't aligned perfectly, but it's in the receiver so you won't see it anyway! :-)

Designed for a 5th gen, it would fit previous generations fine as long as they didn't move where the hole is!

When I originally printed this model I made the hitch pin hole a bit too small. In the attached STL and FreeCAD it's currently 18.5mm which should work fine. Please let me know if you find the hole too big or small. I know it doesn't align perfectly with the receiver hole, but it's plenty close enough.

toyota

hitch

4runner

Comment & Rating (2)

@obrien3dprints

Boosted

great model, does not fit the hitch on my 3rd gen 4Runner. not sure if mine is aftermarket but the hole is not deep enough edit: it does friction fit though, was going to remove it and measure for a new hole but I couldn’t get it out with my fingers

(Edited)