This is an insert designed to fit the retail version of Earth from Inside-Up Games. It supports premium card sleeves—I use Arcane Tinmen AT-10423. I have also added some card tableau grids (printed in two pieces per player), all of which fit in the retail box with little to no lid lift.
NOTE: You will need a printer that can print at least 253mm x 193mm to print the tableau grid and grid holder pieces. You can print the other pieces on a slightly smaller bed but the grids are an integral part of this insert.
The boxes print best at 0.16 line height (0.4 nozzle) but 0.20 or thicker is fine for everything else. You really want to use 0.16 (or lower) for the boxes with lids as there are some small but steep overhangs that are supported much better by a slightly smaller line height. (Check your slice preview.) No supports are needed if you print at 0.16 or lower.
I printed these with 15% gyroid infill, but you can use 10% infill if you increase the number of top shell layers by one (or if you don't care about slight imperfections in the bottoms of the boxes). PLA/PLA+ works great for all of these.
The number of copies of each model to print is at the end of each file name. The tokens shared by all players have two storage boxes each to allow for easy access by all players. The score pad fits into a notch in one of the two trunk/canopy boxes. The first player and active player tokens have their own slots on the end of the card box that holds the non-Earth cards.
Finally, the lids for all the boxes are friction fit and can be stored on the bottom of their boxes so they don't get lost during play. The tolerances on these can be somewhat tight, but they came out beautifully on my Bambu X1C.
Model specific notes follow:
Printer:
BambuLab X1 Carbon
Rafts:
No
Supports:
No
Resolution:
0.16 line height, 0.40 nozzle
Infill:
15%
Filament: eSun PLA+ various