Now here's my own car, background changed with AI and hueforged by myself. Have fun with it!
If you are missing a shelf to put the picture or the other Hueforge pictures on the wall, take a look at my HueShelf ;)
Instructions:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Dark Grey Metallic Transmission Distance: 5
PLA Grey Transmission Distance: 5
PLA White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Dark Grey Metallic
At layer #12 (1.04mm) swap to Grey
At layer #18 (1.52mm) swap to White for the rest.
If you like it leave a heart and show me your prints ;)