This is my adapter plate to use an Prusa Mk3s on my Cr10s Pro. I chose to adapt this extruder because I know there is a lot of great options around to upgrade it to almost anything you want including future evolution of its design directly from Prusa.
Things to know:
-The two blue arrows on one of the pictures are to add two M3 washer there
-You also need to set a couple M3 nuts on the back of the plate where the extruder attaches.
-Use a bowden tube for the cable management there is a spot to zip tie one on the top piece (use two M3 screws to attache this piece)
-except for those washers you can reuse the original hardware from the Pro
-because of the new nozzle position you need the new x and Y endstops holders for it to be right.
-You need to change your firmware accordingly: E3d V6 ( I used a trianglelab clone), direct drive, pinda position.
I originally tweaked the Tiny machine firmware for it and it worked great.
-The cable chain attachment part is to be used with this to add the X and Z cable chain: https://www.thingiverse.com/thing:4155541
I have been running it for many month and I'm very happy with it.
I hope you like this mod and let me know if you have a question.
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
25%
Filament:Coex ABS
Category: 3D Printer Extruders