P1P Anti vibration feet
Copyright Claim
P1P Anti vibration feet
Boost
80
140
37
Print Profile(1)
![Nice finish yet fast, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill](https://makerworld.bblmw.com/makerworld/model/USee41c91cc6e849/design/2023-12-09_404f8736fd4ac.jpg?image_process=resize,w_100/format,webp)
Nice finish yet fast, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill
41 min
1 plate
Boost
80
140
37
0
443
243
Released
Description
These are the anti vibration feet for the P1P, slightly different from the original for printing without Supports.
Use a really soft filament like TPU or TPE
- Infill 15% (more infill = stiffer)
Comment & Rating (37)
All
The print profile is no longer public
One kinda broke but other than that a pretty reasonable print.
0
Reply
Print Profile
Nice finish yet fast, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill
not sure why I printed these cause I found a better foot print but they came out ok
The designer has replied
0
Reply
Thanks for reviewing, I appreciate the feedback!
0
Reply
Print Profile
Nice finish yet fast, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill
perfecta
The designer has replied
0
Reply
Thanks for reviewing, I appreciate the feedback!
0
Reply
Print Profile
Nice finish yet fast, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill
very good
The designer has replied
0
Reply
Thanks for reviewing, I appreciate the feedback!
0
Reply
The print profile is no longer public
Printed good, be careful taking the part off the build plate.
1
Reply
Print Profile
Nice finish yet fast, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill
The overhangs are a mess in TPU, even when dry, slowly printed.
0
Reply
Print Profile
Nice finish yet fast, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill
started falling apart at the spring parts, printer didn’t like the angle of the overhangs, plus it has to be printed 4 times rather than once for all the feet
(Edited)0
Reply
The print profile is no longer public
Steering
0
Reply
The print profile is no longer public
(Edited)
The designer has replied
0
Reply
Why?
0
Reply
Unfortunately it didn't work for me, but it could have been a problem with my TPU
0
Reply
Print Profile
Nice finish yet fast, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill
The designer has replied
0
Reply
Thanks for reviewing, I appreciate the feedback!
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld