Summary

Inspired by the talented design by jootoole (https://www.thingiverse.com/thing:5214891).

Made specifed for Breville/Saga Barista series, BES870, 872, 878, or other 54mm portafilters machines (not tested).

• 2 slots for portafilter.
• 2 slots for tamper/distributing tools
• a slot for brush tool

The variant 2 (Main body 3.stl) is specifically for the following printed tools:

• Coffee Bean Measuring Bowl/Funnel (https://www.printables.com/model/315421-coffee-bean-measuring-bowlfunnel)
• Sage/ Breville Barista Dosing Funnel (https://www.thingiverse.com/thing:5254601)

Highly recommended these two printed tools.

The sizes are made out of tools of what I own (Barista Pro / BES878).

There is another separate wall mount for the buskets, 3 slots in total.

Mounting method: specified slot for up to 18mm wide double-sided tape. Assembly with printed 5 dowel pins and glue.

Print guide:

both printed vertically

• Main shelf: no support needed; 3-4 walls recommended; infill at your wish
• Busket shelf: support needed for the numbers; apply brims if needed

Check my other thing 51mm Coffee Portafilter Wall Mount / Shelf (https://makerworld.com/zh/models/48736) if you are a user of Delonghi EC680/685/885.