This model has been carefully designed to look great with 4 colors.

This is an easy to print 4 color Filament painting to add to your décor.

Only filament swaps! No AMS necessary.

This does not need an AMS to print, but it does make it easier.

If you have an AMS, print directly from the provided print profile.

If you don't have an AMS, open and slice in the Bambu Studio or any Slicer app and add pauses at the provided layer heights for filament swaps.

---------------------------------------

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

Swap Instructions:

Start with Black
At layer #9 (0.88mm) swap to Gray Dark
At layer #13 (1.2mm) swap to Gray Ligth
At layer #17 (1.52mm) swap to White for the rest.