MacBook Pro 14in (2023) Vertical Stand - Voronoi Edition by John Hoke

John Hoke

Household>Office

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.16mm layer, 3 walls, 10% infill

Designer

7.8 h

1 plate

5.0(6)

0.2mm layer, 3 walls, 10% infill

Designer

6.9 h

1 plate

4.0(1)

Boost

Released

Description

I recently got a new desk (Secret Lab Magnus Pro) and needed to design a bunch of acceories for it, of course!

This stand will snuggly fit a 2023 MacBook Pro 14" model without being too tight and scratching the surface. Using this with dual monotirs standing vertically off to the side frees up plenty of desk space and with the Eryone Ultra Silk Red PLA it really pops and fits with my desk colors

Printing

Hotend: 0.4 Nozzle with 0.16mm profile
Seam Position: Back
Strength
- 3 Walls
- 6 Bottom Layers (1mm min thickness)
- 10% Gyroid infill
Speed (silks LOVE to be slower)
- First Layer: 50
- First Layer Infill: 75
- Outer Wall: 50
- Inner Wall: 200
- Sparse Infill: 200
- Internal Solid Infill: 200
- Top Surface: 50
No Brim or Supports needed

If you find this useful, please like and post a make. I really enjoy seeing how others use my models 🖤

Comment & Rating (10)

@steven.hayden

Print Profile

0.16mm layer, 3 walls, 10% infill

worked like a charm. No artifacts.

The designer has replied

@JohnHoke

Thanks for the rating and comment! Hope you enjoy it

@ChrisPrints3D

Print Profile

0.16mm layer, 3 walls, 10% infill

Great Print

The designer has replied

@JohnHoke

Thank you so much

@SteveCCC

Print Profile

0.16mm layer, 3 walls, 10% infill

great! 👍🏻

@RoCry_

Print Profile

0.2mm layer, 3 walls, 10% infill

The designer has replied

@JohnHoke

Hey there -- thanks you for the rating -- if I can ask what you think needs improvement I would love to know and learn from it ;) I am still learning and constructive criticism is always welcome!