This is a magsafe charger for the BMW E9x models. It uses a magsafe charger to make sure your massive phone stays in place while it is being charged. This was designed because none of the current designs I found would fit my iPhone 14 max with an otter box case. It replaces the “Oddments tray”
The slot for the phone is 174mm x 14mm x 65mm. The slot for the magsafe is 56.5mm diameter (I used an off brand magsafe, not sure if it is OEM size.)
Be sure that the magsafe charger you are using has a USB C wire. Otherwise it will not fit through the slot.
While it is not needed, I recommend gluing the magsafe charger in place so it does not slide forwards with your phone.
PRINTING INSTRUCTIONS
Please print this in ABS or ASA. PLA is not UV resistant and will melt in your car if you live in a hot environment.
You will absolutely need all of the supports you can get. I printed this in ASA with normal tree supports at 50 degree over hang. Your results may vary.