Fan Blade Vacuum Attachment V2.0 by Fat Tony

Fat Tony

Household>Other House Models

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer with support

Designer

2.9 h

1 plate

4.6(24)

Boost

199

198

Released

Description

Wanted to clean all my ceiling fans with my shark navigator lift-away vacuum without making a dusty mess. Created this vacuum attachment with multiple internal throughways to capture dust and grime.

Should work on most vacuums with >1.3" attachment diameter. Can make other inlet sizes if you leave a comment for what you need.

Works great to get the bulk of the yuck off, but expect to still need a wet cloth to get it squeaky clean.

The flat side that is printed on the bed should be facing the operator when in use. Requires support inside the inlet internal diameter.

Added specific diameter adapters requested by users. These are labeled BETA and are UNTESTED until further feedback. I will update as I receive user feedback. Adapters are tapered, so should work with diameters roughly +/- .015"

Comment & Rating (34)

@nickynunchucks

Print Profile

0.2mm layer with support

while it doesn't fit my older shark model, I can tell a lot of thought went into this print. had 0 issues removing supports with a set of good needle nose pliers. Hey Tony, any chance you have an inlet for this to fit on a 38.5 mm?

The designer has replied

@FatTony

Thanks for the kind words. Published one for you, let me know how it works. Enjoy!

@user_492075572

Print Profile

0.2mm layer with support

This model prints with ease, Tony is amazing, worked with me to get a new adaptor made to fit my specific vacuum. Tony is great if u need an adaptor he will definitely help out. My wife is excited she really wanted this attachment, especially cuz two of our fans are dangling from 16’ ceilings. Thanks Tony really appreciate it.

@bthomas3664

Print Profile

0.2mm layer with support

turned out good with minor flaws, the supports were hard to remove though

@lguard8

Print Profile

0.2mm layer with support

@Burns

Print Profile

0.2mm layer with support

seems good. interior supports weren’t a big pain to remove. shape where it connects to the vacuum is a little odd and also didn’t fit, so I’m making an adapter for that!

The designer has replied

@FatTony

Yeah, it was modeled for a shark navigator lift away vacuum as stated in the description, not guaranteed to be a universal fit for all vacuum's. That's why it says can make other inlet sizes based on user comments. LMK if you want me to alter it to your vacuum's dimensions.

(Edited)

@Burns

Replying to @FatTony :

hey thanks for the response. I was able to make an adapter for it. it works great!

(Edited)

@kaosis

Print Profile

0.2mm layer with support

best design I’ve found. very well thought out

The designer has replied

@FatTony

thanks, I'm glad you like it 👍

@mike_cinelli

any suggestions on an adapter for Tineco vacuum?

The designer has replied

@FatTony

feel free to pm me some dimensions/pics and I'll see what I can come up with for you

@tristanelliott8

could you create one for a 1 3/4” hose?

The designer has replied

@FatTony

Added an adapter to [hopefully] accommodate Ø1.750". I don't have anything with the correct inlet size so unfortunately you will need to be the guinea pig. Please let me know how it goes if you print it, STL is under raw model files. Adapter requires supports.