Rosa3D's Refill on Sunlu's Spools by jocelyn.boez - MakerWorld

3D Printer>3D Printer Accessories

Copyright Claim

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1

X1E

A1

0.28mm layer, 2 walls, 8% infill

0.28mm layer, 2 walls, 8% infill

Designer

31 min

1 plate

0.28mm layer, 2 walls, 8% infill

0.28mm layer, 2 walls, 8% infill

Designer

55 min

1 plate

0.28mm layer, 2 walls, 8% infill

0.28mm layer, 2 walls, 8% infill

Designer

1.7 h

1 plate

Boost

3

4

2

0

5

1

Released

Description

Rosa3D's official metal masterspool doesn't fully fit into the ams, forcing it to be left open and if not, scratching the cover…..

Having empty sunlu spools, I might as well reuse them by modeling an adapter...

After printing 2 pieces :

1 - Cut the empty sunlu spool in half (a hacksaw will do just fine)

2- Insert the adapters on the 2 parts, but be careful, the holes for the zipties must be placed on the open parts of the coil (slots will allow you to pull with a flathead screwdriver just in case)

3 - Turn the zipties heads gently to the outside of the refill

4 - Insert refill firmly into adapters

5 - Secure the filament into the spool's holes

6 - Cut zipties and pull them

8 - Ready-to-use refill :)

masterspoolrefill

Comment & Rating (2)

Thanks for help with this crazy spool from Ali

1

Reply

thanks for the CAD!!!!

0

Reply

No more

License

This work is licensed under a

Creative Commons Attribution-Noncommercial-Share Alike

Related Models

Sunlu Spool Rider - Low COG Weight For Light Spool

Sunlu Spool Rider - Low COG Weight For Light Spool

0

2

2

CrossHatch Pattern Reusable Spool - Bambu Refill

CrossHatch Pattern Reusable Spool - Bambu Refill

6

37

89

Bambu Lab Spool Weight for AMS for SUNLU spools

Bambu Lab Spool Weight for AMS for SUNLU spools

0

3

5

Refill Master Spool - fit A1 Mini / A1/ AMS Lite

Refill Master Spool - fit A1 Mini / A1/ AMS Lite

0

2

4