This great decoration or gift is built to be customized with Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign).

It comes with a little stand, but it's your choice if you want to add it. I'm always thinking about what you want. 😉

Please follow the instructions below to generate your own content for inside the heart. Go on, have a heart.

Instructions

1. Visit Make My Sign from MakerWorld (makerworld.com/makerlab/MakeMySign)
2. Press the ‘Create from Blank’ button (near the top)
3. When asked to select a template, just close out of it with the ‘X’ button.
4. Set the base plate style to the heart
5. Change the dimensions to 90mm wide x 100mm high.
6. If you choose to use a border, make sure that it is offset by at least 2mm
7. Set the thickness to 2mm.
8. Style the sign as you want.
9. When complete, download the design and open it in Bambu Studio for printing.

Assembly

1. Place the backing plate on a table (the part with the pins sticking out of it.
2. Add the sign to the back and face it upwards.
3. Position the front piece on top and align all of the pins to the holes.
4. Press down firmly and evenly until the 2 parts fully lock together. It will take a little effort.
5. If you choose to add the stand, align it to the bottom of the heart and press together.

Please show me some love too and post some images of items that you print. I'm needy and desire the feedback (especially after not getting any results from the fidget toy competition). I don't ask for much.