----------if you like my work please, follow me and spread some love giving some like, ill do the same❤️---------
Tollerance test for choose the correct gap between 2 printed pieces like hinges or parts that require tight assemblies
From 0.05mm to 0.3mm
Example of use:
let's consider a shaft with a diameter of 5mm and a hole with a diameter of 5mm, suppose that from this test you have that the little cylinder fit well in the hole under the lab “0.2”.
If you print the two pieces exactly with these measurements the shaft will never fit into the hole, this will only be possible if you make the hole slightly larger, exactly at least 0.2mm and therefore with a diameter of 5.2mm