This is a 40mm bed fan and duct for a Makergear M2 with a v4 head. The usual fan is 50mm, but I wanted dual Noctua fans for silent running. I also switched out the power supply fan for a 60mm Noctua and added Astrosyn dampers on the motors. It is crazy quiet now!
If you have a newer model M2 make sure to use a 24v to 12v converter to power the fan. I used a small R/C model buck converter.
Printer Brand:
MakerGear
Printer:
M2
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.20mm layers
Infill:
30%
Notes:
Print as designed using supports. Make sure that auto-supports do not fill the four mount holes
Category: 3D Printer Parts