The Enchanted Forest Mushroom Keychain is an inviting project for 3D print enthusiasts at any level. Its iconic shape and playful design make it a joyful addition to any set of keys or as a cute adornment for bags.

If you're looking to support my work or obtain a commercial license, consider joining a Patreon membership. (This model is included!)

https://www.patreon.com/Stistko

Usage: Apart from its use as a keychain, this model can serve as a delightful piece of hanging art or a component in a larger DIY project, like a mobile for a child's room or a hanging garden ornament.

Recommended Colors: The classic red cap with white spots is suggestive of storybook mushrooms, but feel free to experiment with colors. A brown or green cap could give it an earthier feel, while pastel colors can lend a softer, magical touch.

Essential Information:

• No supports are needed for this print, keeping it simple and clean.
• For enhanced durability, consider a higher infill if it will be used frequently.
• If you're new to 3D printing, make sure to calibrate your printer for the best results, especially for the small details like the spots and stem texture.
• Material suggestion: PLA for its ease of use and eco-friendliness.
• Layer height: 0.1-0.2mm for a smooth finish.

The model's stem should be solid enough to withstand daily use, and the hole at the top of the cap must be printed with a size that allows easy threading of a keyring or string. Enjoy bringing a touch of the enchanted forest into your daily life!