I'm printing the longer print, the bigger one. I don't see how Hans is going to fit in the slot? And he's falling face first, I'll spin him around though.....Blasphemy!!🤣
cool pls let me know how it goes buddy ,he clips in the see through add ins are negative ,once you slice it you will see there hollow to allow the figure to clip in
yeah, I printed him, the clip isn't sized right. it won't clip in or slide down the notch. I just finished the building the dowel pins and holes are probably the best I've ever printed. the tree removal was slick as can be, awesome fit. And the support under the pins was so good I need to figure out that interface height to get perfect of a print on the bottom with the support falling off.
Calendar looks good but at the 50% scale the numbers are hard to read and have a tendency to pop off as Hans falls past. From that perspective the full scale model may be a better choice. Very easy to assemble.
Strength Issue:50% size model. The doll pins break way too easily. I recombined the three pieces of the tower so they would stay together and designed my own stand.