EDIT: Added a new block box with storage for the rocker board, die and stand. Also removed the lettering from the stand as it impeded the board from fully rocking. If you have already printed the box I included the 3 storage accessories on their own plate so you can print them and glue them on. I did and it works fine.

Have seen this game in ads and other STL sites and wanted to design my own. I added a box that will hold 21 pieces and you can increase the “Z” by 20mm to add layers or print another box. The bottom of the box and lid has the piece designs, colors and piece numbers for easy storage and game play and an eight sided die is included for play. The rocker must be placed on the base during play or it may never topple.

Game play:

1. Roll the die - place the game piece number rolled anywhere on the rocker
2. If you roll an 8, pick the piece of your choice
3. If you roll a number that has a piece count of zero the the player to the right chooses for you
4. you may not hold the rocker to place the piece
5. First person to topple the tower loses

Please remember to rate and comment, Thanks