Cute Mini Octopus
Copyright Claim
Cute Mini Octopus
Boost
1572
2815
1884
Print Profile(28)
0.2mm layer, 2 walls, 0% infill
Designer
1.3 h
1 plate
2 Colors, 0.2mm layer, 2 walls, 0% infill
Designer
1.4 h
1 plate
0.2mm layer, 2 walls, 0% infill
Designer
13 min
1 plate
2 Color, 0.2mm layer, 2 walls, 0% infill
Designer
18 min
1 plate
Click to see more
Boost
1572
2815
1884
78
9.8 k
14.2 k
Released
Description
Cute Mini Octopus, the original!
It's designed so it can be printed at once. No assembly or supports required.
Spare tentacle available as well, no need to discard failed prints!
Documentation (1)
Other Files (1)
LICENSE.txt
Comment & Rating (1884)
All
Print Profile
0.2mm layer, 2 walls, 0% infill
no idea what happened I used the base build setting and this is what came out
0
Reply
i had the same issues, but i would cancel the print by 5-10 layers in, happened 3 times.
im now trying other profiles listed
0
Reply
Boosted
What build plate are you using? worked well for me on x1c with cool plate and a small ammount of glue.
0
Reply
Replying to @Elijah_07
I'm using the textured plate that came with it
0
Reply
Print Profile
Optimized (Standard) - 0.2 layer
I was hoping it was going to work but just not enough surface area without a brim.d
(Edited)
The designer has replied
1
Reply
Hey, thanks for the feedback. I'll keep an eye out for this issue.
In the meantime, I recommend cleaning the bed plate with dishwashing liquid and a clean microfiber lint-free cloth, and then wiping it again with IPA and another clean lint-free cloth.
This will clean any finger grease and whatnot from the plate and help with bed adhesion.
Let me know how it goes 👍
(Edited)1
Reply
Hey kstambaugh09, I've just made a great improvement to the adhesion of the tentacle ends, which seems to be the most problematic area!
I've just uploaded the updated profile, check it out!
Thanks again for the feedback 😃
(Edited)
1
Reply
I just added this around the octopus cuz it keeps detaching even on the bigger parts.
0
Reply
Print Profile
Optimized (High Quality) 0.16
supper awesome print, everything worked great!
The designer has replied
1
Reply
looks great! thank you
what filament is that?
0
Reply
Replying to @kvnper
Bambu Labs PLA Dark blue
(Edited)1
Reply
Print Profile
Smooth top, Adhesion fix (brim), 0.2mm layer, 2 walls, 0% infill, one color, no tower, back seam
Perfect 💯
The designer has replied
1
Reply
thank you
0
Reply
Print Profile
Optimized (Standard) - 0.2 layer
Printed on the A1 Mini and used a custom filament profile. Nice and funny model!
The designer has replied
1
Reply
that's a nice filament
0
Reply
Print Profile
Optimized (High Quality) 0.16
Printed great with fast and High Quality!
The designer has replied
1
Reply
lovely
0
Reply
Print Profile
Optimized (Standard) - 0.2 layer
perfect easy print ,looks nice :)
(Edited)
The designer has replied
1
Reply
nice filament!
0
Reply
Print Profile
0.25mm - 2 walls
Prints wonderfully.
The designer has replied
1
Reply
Thank you for reviewing, I appreciate the feedback.
0
Reply
liked how it turned out
0
Reply
Boosted
Print Profile
Optimized (High Quality) 0.16
Very good !
1
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld