Can/drink dispenser for NOCCO, pepsi, coke etc.
Remixed by
Copyright Claim
Can/drink dispenser for NOCCO, pepsi, coke etc.
Remixed by
Boost
20
68
3
Print Profile(1)
0.2mm layer, 2 walls, 15% gyroid infill, 5mm brim
10.1 h
3 plates
Boost
20
68
3
1
80
11
Released
Description
I adjusted the original model spacer to 30mm spacer so it fits the 150mm cans like NOCCO, pepsi, coke etc. I also added ALL models needed to build a complete model.
Just print:
- 1x of each stl uploaded.
- PLA/PETG
- 97% scale on pins, and print with brim!
I recommend printing the pins at 97% scale to better fit the holes, and then use superclue to build the model.
Original version here: https://www.printables.com/model/250799-drink-dispenser-different-models
Comment & Rating (3)
All
The bottom spacer doesn't seem to fit. Its about 3-5cm to long and 1-2cm to high.
And it seems to be missing 2 bottom parts compared to the original
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% gyroid infill, 5mm brim
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% gyroid infill, 5mm brim
0
Reply
No more
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld