Tank toy - Print in place ! by Waikikiprod

Waikikiprod

Toys & Games>Other Toys & Games

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 3 walls, 15% infill

Designer

48 min

1 plate

4.3(86)

support A1 0.2mm layer, 3 walls, 15% infill

55 min

1 plate

4.8(33)

PLA 0.20mm

54 min

1 plate

5.0(3)

0.2mm layer, 2 walls, 15% infill

47 min

1 plate

4.3(3)

Click to see more

Boost

177

254

148

725

755

Released

Description

ENGLISH (En français plus bas)

Discover this small articulated tank printable directly without support ! Its wheels and the turret can rotate !

This model needs to be printed on the right side, a support for the barrel is already integrate.

An ingenious system will allow you to print the pivot link of the turret without any supports.

Before printing you must ensure that :

Your bed level is well adjusted and cleaned
Your cooling is sufficient

If you break the wheels of the tank you can print the spare wheel created by Bubutech

This model is inspired by the superb work of agepbiz and its famous print in place vehicles.

Variations are available :

Follow me on Instagram / TikTok / Facebook / Beacons

Discover My Best 3D Models

FRANCAIS

Découvrez ce petit tank articulé imprimable directement sans support ! Ses roues et la tourelle peuvent tourner !

Ce modèle doit être imprimé sur le côté droit, un support pour le canon est déjà intégré.

Un système ingénieux vous permettra d'imprimer la liaison pivot de la tourelle sans aucun support.

Avant d'imprimer, vous devez vous assurer que :

Votre niveau de lit est bien ajusté et nettoyé
Votre refroidissement est suffisant

Si vous cassez les roues du tank, vous pouvez imprimer la roue de secours créée par Bubutech.

Ce modèle s'inspire du superbe travail d'agepbiz et de ses célèbres véhicules imprimés en place.

Variations are available :

Follow me on Instagram / TikTok / Facebook / Beacons

Discover My Best 3D Models

Comment & Rating (148)

@slingshotbaseju

I’m printing on my x1 carbon in Petg basic 15% infill bottom sude of th turret is stringy any suggestions?

(Edited)

The designer has replied

@Waikikiprod

Hi and thank you. I designed this model for PLA 3D printing. PET tends to stringing. If you use à générique profil maybe you should adjust the retraction

@slingshotbaseju

Replying to @Waikikiprod :

thank you

@jcjc89

Print Profile

0.2mm layer, 3 walls, 15% infill

print fails on tank's canopy slides off print bed where contact is less update: changed filament that sticked better, printed out awsome on the p1s

(Edited)

The designer has replied

@Waikikiprod

hello. have you change my print parameters?

@BusyJon

Print Profile

0.2mm layer, 3 walls, 15% infill

beautiful. prints clean. rolls great. love it

The designer has replied

@Waikikiprod

thank you 😀

@xtrmgolfr

Print Profile

0.2mm layer, 3 walls, 15% infill

cute design however slice it yourself and add in a support to prevent the spaghetti. PS1, jayo PLA, used first profile from app. had great success with other models from designer so printed in multiple.

@robin.debo

Print Profile

support A1 0.2mm layer, 3 walls, 15% infill

Easy and quick to print

@user_410345478

Print Profile

0.2mm layer, 3 walls, 15% infill

awesome print make a bunch have a battle

@MadMax3D

Print Profile

0.2mm layer, 3 walls, 15% infill

Printed well. Had to use a brim, but it was easy to remove.

@Themisto

Print Profile

support A1 0.2mm layer, 3 walls, 15% infill

Quick, easy print. Everything printed in place and it was fully functional with the wheels and the top spins the full 360. This one comes out about the size of Hot Wheel/Matchbox cars. Just make sure to take great care when taking this print off of the plate. At this size, the wheels are a bit delicate. We had one of them break off while we were taking it off the plate.

@debugger

Print Profile

support A1 0.2mm layer, 3 walls, 15% infill

Perfect! Nice Tank!

(Edited)

@Dursun

Print Profile

support A1 0.2mm layer, 3 walls, 15% infill

funktioniert super

License

This work is licensed under a

Creative Commons Attribution-Noncommercial-Share Alike

Remixes (3)

Multicolor tank toy - Print in Place

Waikikiprod

103

GIF

Remote Controlled Tracked Tank

Pretzel 3D

Click to see more

Related Models

Multicolor articulated chameleon

Little Maker

160

226

Cinnabun Flexi - Print in Place Kawaii

SugarPaws

Flexi Lizard print in place

cruse2382

183

280

GIF

Double Side, Middle Finger UNO

xerko

X1C Keychain	Axe Magnet	Tank toy - Print in place
Foaming Soap Dish	The console of your childhood	The Ultimate Fidget Avocado Keychain

X1C Keychain	Axe Magnet	Tank toy - Print in place
Foaming Soap Dish	The console of your childhood	The Ultimate Fidget Avocado Keychain

Multicolor Version	M1 Abrams print in place	Tank toy - Print in place !