A replacement radiator pipe cover. The Holes are 17mm in diameter so that a 16mm pipe can easily fit, because the distance of the pipe on the ground can vary, there are differerent lengths availible.

To determine the size you need simply calculate the center distance, measure the outer distance between the pipes and subtract the diameter of one pipe(16mm). I have labeled the size in the document name, to have a set you each need an A and B part.

There are various the sizes 45;46;48;50;52;53mm. There is an additional cover with one elongated hole it has a minimum distance of 41mm and a maximum distance of 50mm. If your distance doesn't exactly match up be aware that you have a 1mm tolerance for each side.

The camfers of the joining mechanism each have a different angle and a little bit of headroom. This makes it possible that the two parts tightly join together so that they don't self release, even when hit.

I have printed the parts in ABS because the pipes can become quite warm and i dont want the parts to melt or deform. I chose an Infill of 15% and 2 walls. There are no supports nessesary, orient the part in a way that the upper face is on the printbed.