LA Dodgers Hueforge

Color Swap or AMS

Don't Forget the frame:

Frame for LA Dodgers Hueforge by dohara1985 - MakerWorld

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Transmission Distance: 4
PLA Protopasta White Transmission Distance: 3

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blue
At layer #18 (1.52mm) swap to White for the rest.

Please "Like", review, follow and upload make.

I spend a lot of time designing and allow it all to be used for free (including commercially).

If you'd like to help me out, below are the possible ways. Thank you in advance!

https://www.buymeacoffee.com/dohara1985o

Venmo: Dohara1985

Paypal: @Dohara1985