An elegant decorative piece for your home or office desk in the shape of vintage radio. But it is not just a decorative piece, it can hold regular size tissue box inside for you to be able to dispense tissues and not only that, but it also gives you small storage space.

Printing Tips

“Drawer”, “Walls Top” and “Opening Ring” requires supports on build plate. Everything else prints without any supports. If you like the look of display pics, then print “Back Wall Bottom”, “Back Wall Top”, “Removable Back Wall”, “Front Outer Wall Bottom”, “Front Outer Wall Top”, “Opening Ring” and “Radio Button 1 x2” pieces in different color than rest of the pieces.

Assembly

1. Glue “Walls Top” & “Walls Bottom”.
2. Glue “Front Inner Wall Top” & “Front Inner Wall Bottom”.
3. Glue “Front Outer Wall Top” & “Front Outer Wall Bottom”.
4. Glue “Front Inner Wall” to “Walls”.
5. Glue “Front Outer Wall” to “Front Inner Wall”.
6. Glue two “Radio Button 1 x2” to “Drawer”.
7. Glue two “Radio Button 2 x2” to “Radio Button 1 x2”.
8. Insert “Drawer” from front side.
9. Glue “Drawer Back” to “Drawer”.
10. Glue “Back Wall Top” & “Back Wall Bottom”.
11. Glue “Back Wall” to “Walls”.
12. Glue “Opening Ring” on “Walls” at top.
13. Insert “Removable Back Wall”.

In order to insert Tissue Box, simply pull out “Removable Back Wall” and once inserted, put back the removable back wall.

The exact dimensions of the available space for tissue box is 240mm(L) X 125mm(W) X 90mm(H).

It will fit below two standard sizes boxes which are usually specified as Low Flat and Medium Flat boxes.
Low Flat Box Size: 225.5mm(L) X 120.65mm(W) X 58mm(H)
Medium Flat Box Size: 225.5mm(L) X 120.65mm(W) X 88mm(H)