easy to print sign, ideal for your thanksgiving dinner decoration.
as usual, it is designed to fit any mid size printer, each color is separated file so you can print it with a single nozzle printer or separated plates for minimize filament changes.
you can customize it by selecting your personal detail elements or even none:
-candles
-pumpkin pie
-dinner
-turkey
-pumpkin
-autum leaf
Just add a filament change at height or paint it direct from the slicer
Print Settings
Material: PLA / PETG
Layer height: 0,20 mm
Nozzle diameter: 0,4mm or 0,6mm
Infill: 10-12%
Perimeters: 2
Supports: no
Printing Tip
the tolerances are a little tight, so make sure you don't have "elephant foot” in your printer to get them to fit right. if you can't avoid it then you just have to scrape or sand the base of each piece a little to make it fit. And if they are a little loose, use some glue to hold them.
You can see my other models here:
Diego Alvarez | Published - MakerWorld
________________________
If you like my designs and want to sell physical prints or support me , you can check out my patreon for commercial license and exclusive models
https://www.patreon.com/meafdesigns
________________________