DK Riser for BambuLab X1 works with BL LED Controller Remixed by detLAN

Remixed by

detLAN

3D Printer>3D Printer Accessories

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 3 walls, 15% infill

Designer

20.5 h

8 plates

4.8(12)

Boost

152

341

Released

Description

DK Riser für BambuLab X1 funktioniert mit BL LED Controller

Ich liebe DK Riser for BambuLab X1 von papsjundi und ich liebe BL LED Controller von DutchDeveloper. Leider passen die beiden nicht wirklich zusammen, da ein LED-Streifen für DK Riser nur 10 mm breit sein darf. Beim BL LED Controller sind diese 12 mm breit.

Da das Original bis auf 2 mm perfekt ist, wollte ich so wenig wie möglich verändern. Ich habe nur die vier Hauptteile (Druckplatte 1 und 2) angepasst, alle anderen Teile können dem Original entnommen werden.

Wenn Ihnen dieses Projekt gefällt, vergessen Sie bitte nicht, zu ❤ liken und zu ★ bewerten!

I love DK Riser for BambuLab X1 from papsjundi and I love BL LED Controller from DutchDeveloper. Unfortunately, the two don't really fit together, as an LED strip for DK Riser can only be 10 mm wide. For BL LED Controller these are 12 mm wide.

Since the original is perfect except for 2 mm, I wanted to change as little as possible. I only adapted the four main parts (Plate 1 and 2), all other parts can be taken from the original.

If you like this project, please don't forget to ❤ Like and ★ Rate!

23.12.22 Update

Diese kleine Lücke nervt Sie. Kein Problem, kleben Sie einfach ein 20 x 10 x 0,5 mm großes Stück des gleichen Filaments dahinter. Im Druckprofil finden Sie diese viermal auf Druckplatte 8.

This little gap annoys you. No problem, just stick a 20 x 10 x 0.5 mm part of the same filament behind it. In the print profile you will find these four times on plate 8.

23.12.21 Update

Um die Naht besser zu verbergen habe ich im Druckprofil die großen TPU-Stücke neu angeordnet.

To better hide the seam, I rearranged the large TPU pieces in the print profile.

---

Forgive me for the grammar, Google helped with the translation

Comment & Rating (24)

@plugowski

Print Profile

0.2mm layer, 3 walls, 15% infill

in general quite well model, but I got few issues: - small overhangs on the frame - magnet slots doesn't align magnets straight in some places...

The designer has replied

@detLAN

Thank you for the kind review and the ⭐️⭐️⭐️⭐️

@Jimmer

Print Profile

0.2mm layer, 3 walls, 15% infill

fits 12mm light perfect, just what I needed

(Edited)

The designer has replied

@detLAN

Thank you for the kind review and the ⭐️⭐️⭐️⭐️⭐️

@JAYDUO

Print Profile

0.2mm layer, 3 walls, 15% infill

The best mod Thank you so much

The designer has replied

@detLAN

Thank you for the friendly feedback and the five stars!

@BatMake

Print Profile

0.2mm layer, 3 walls, 15% infill

Came out great, but no idea where the instructions are on the little TPU square pieces or what size magnets to use. I ended up having magnets that fit perfectly by pure luck, so it came out incredible. What are those little squares for though?

The designer has replied

@detLAN

Thank you for the friendly feedback and the ⭐️⭐️⭐️⭐️ The small squares can be used to cover the light gaps if you stick them on the back.

(Edited)

@b.kemp

Print Profile

0.2mm layer, 3 walls, 15% infill

Printed and fit perfectly. what a difference, love it.

The designer has replied

@detLAN

Thank you for the friendly feedback and the ⭐️⭐️⭐️⭐️⭐️

@user_3645444190

Print Profile

0.2mm layer, 3 walls, 15% infill

Watch the assembly YouTube video first Good to add all the magnets before installing the doors/flap. test fit the LEDs to make sure power cord is long enough to connect to power. If you want to use transparent PLA/petg for the flaps, use clear tpu for the flap pieces. Lastly, be sure to test fit all the pieces for proper orientation. I got it all together and it didn't fit the top of the printer. The 7.5/longer end go across back and front and the 7 inch sections go along the slides.

The designer has replied

@detLAN

Thank you for the friendly feedback and the ⭐️⭐️⭐️⭐️⭐️