Wake up SAMURAI, we have city to burn.
My creation of Samurai logo from Cyberpunk 2077 I hope you will enjoy it :).
Printed on MK3+, little bit of sanding at the end should remove some imperfections, just be carefull so you don't remove the tiny details on printout.
Dimensions (h x w): 15mm x 13mm
Stand: https://www.prusaprinters.org/cs/prints/154505-sign-stand
IMPORTANT - there are 2 colour changes as follows, 2.0-2.2 (Silver) and 2.4 - 2.6 (Red) Start with black 0-1.8.
2 perimeters
15% infill
Ironing for top layers only. Use height range modifier for layers 2.0 - 2.7 with ironing turned on. Flow was decreased to 10%.
I used top layer extrusion multiplier raised 0.45 because I'm still fighting with gaps between perimeters.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.