M8 Clipz Fast and strong :)
Copyright Claim
M8 Clipz Fast and strong :)
Boost
5
13
4
Print Profile(1)
Regular print, 0.2mm layer, 2 walls, 15% infill
10 min
1 plate
Boost
5
13
4
0
14
9
Released
Description
Summary
I use bearings and M8 rods to store my filament on.
But i dont like to spin the M8 nuts all the way to the desired place and normal clips aren´t strong enough for my needs.
So I designed these M8 threaded clips to solve the problem.
They worke nice and are easy to put in place and tighten.
I would recommend you to use a more flexible filament like PETG.
If you like this design and want a M6, M10 or other Clipz simply write it :)
Have fun and keep printin!
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
200
Infill:
100%
Filament:
Fiberlogy PETG
GreyComment & Rating (4)
All
Print Profile
Regular print, 0.2mm layer, 2 walls, 15% infill
The threads are a little to tight. It needed to be turned a couple of times before it ran smoothly.
(Edited)
0
Reply
Hi. Can You make M5 clip?
0
Reply
Print Profile
Regular print, 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
Regular print, 0.2mm layer, 2 walls, 15% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld