Good!

Works perfect!

$fn=200; /********************************** spool adapter for AMS lite and 3DimsFila 3D Printer PLA Filament https://a.co/d/dpG0TVK This can be used as a generic spool adapter for most scenerios by adjusting the variables *////////////////////////////////// //Constant Variables, for the inner cylinder ID=60; OD=68; Depth=52; FinDepth=1.5; //the inner diameter of the spool, if you don't want it tapered use the same value for both TopDiameter=75; BottomDiameter=75.5; difference(){ cylinder(h=Depth,d=OD); cylinder(h=Depth,d=ID); } intersection(){ RotateDulpicate(20) translate([32,0,0]) rotate([0,0,-45]) cube([15,FinDepth,Depth]); cylinder(h=Depth,r1=BottomDiameter/2,r2=TopDiameter/2); } module RotateDulpicate(n){ a = 360/n; for(i = [1:n]) rotate([0,0,i*a]) children(); }

Much too large and no information on how to use it

ok

Printed well, however it does not fit my spools well, even when printed in TPU. My spools are in between standard and ESun though, so that is somewhat expected.

This is very rigid if printed in PLA so make sure the dimensions are correct for the spool you intend to use it with before you print!

the Wings are very Stoff, Not much tolerance in size.

bon fichier