Quicky (Angle grinder wrench)
Copyright Claim
Quicky (Angle grinder wrench)
Boost
429
617
81
GIF
Print Profile(4)
0.2mm layer, 6 walls, 25% infill
Designer
1.4 h
1 plate
Single color, strong, 0.2mm layer, 6 walls, 25% infill
1.2 h
1 plate
ASA - 0.2mm layer, 6 walls, 25% infill
1.4 h
1 plate
No Logo 0.2mm layer, 5 walls, 25% infill
1.3 h
1 plate
Boost
429
617
81
4
876
513
Released
Description
Info: The wrench fits for anglegrinder nuts with 35mm hole circle diameter. But like some comments mention there are also other types of nuts with 28 or 20 mm hole distance. Check your dimensions before you print it
Found this Idea in the video of pocket83 and had to do a 3D printed version of it
The model prints without supports if you use 0.2mm layerheight.
For furhter hardware you need at least 2 M5x20mm hex nut screws.
You can screw them directly in to the model. If the fit is too tight you can tap the holes before screwing the screws in.
Comment & Rating (81)
All
Print Profile
0.2mm layer, 6 walls, 25% infill
Printed great. Unfortunately it doesn't fit my Makita cordless grinder (28mm center to center screws) but I didn't reduce my rating as I still think it's a great design. I plan on remixing it to fit and will upload.
(Edited)
The designer has replied
6
Reply
Didn't fit mine either. Trying another at 82.5% Confirmed 82.5% fits my grinder with 6-32 x 3/4 screws and nuts.
(Edited)1
Reply
Thx for the info and sorry for the wasted plastic. I thought the size with 35mm for the standard 125 disk angle grinder is the norm. I put a Info now on top of the project.
0
Reply
Perfect! Thank you!
1
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
Cool print they look great, thanks for sharing your design! I printed one for myself and one for a work mate, luckily his Milwaukee and my Dewalt were both 35mm
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
printed very nice. excited to try it. looks great.
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
Très pratique ! Merci pour ce design ;-)
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
Vielen dank
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
it looks very clear thinm my friend is really going to enjoy it
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
perfect print, now I have to only check if it fits😀
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
(Edited)
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRemixes (1)
Related Models
© 2024 MakerWorld