Fitting ring for lifting "normal" inner door leaves.
Outer diameter 15.8 mm and inner diameter 10.2 mm. The height should then be reduced to the required height using a slicer. I used 1.6 mm for my purpose.
Material: ABS
Nozzle: 0,4mm
Solid printed with 5 "outside" walls -> therefore no infill.
Printer:
Bambu Lab - P1S AMS
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0,2mm high
Infill:
100%
Filament: eSun ABS
Notes:
Material: ABS
Nozzle: 0,4mm
Solid printed with 5 "outside" walls -> therefore no infill.