Platform 9 3/4 hanging sign by TOMF00LRY

TOMF00LRY

Art>Signs & Logos

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 3 walls, 10% infill

Designer

19 h

4 plates

5.0(29)

Boost

219

338

387

334

Released

Description

This is a platform 9 ¾ sign from Harry Potter. The sign can be printed twice for a double sided sign, or once for single sided. The arm of the hanger needs to be mirrored and both sides printed to use the wall mounted bracket. The bracket is designed to be easy to hang, then the arm slid in from the top with a dovetail joint.

These are the chains i used to hang the sign https://www.amazon.com/dp/B0B5JRVS8S?ref=ppx_yo2ov_dt_b_product_details&th=1

I had to use pliers to straighten the hooks, feed them through the holes, then bend them back.

***update*** made the sign thinner to use less filament, as well as made each color start at a specific height for color changing without an AMS. Also, the holes in the hanger and the sign were made larger to fit a chain more easily.

Comment & Rating (33)

@dana.nelson

Print Profile

0.2mm layer, 3 walls, 10% infill

I scaled this back to 50% to use as a Christmas tree ornament. I used the paint tool in Bambu Studio to change the bottom layer to all black. Studio kept the line detail as-is so it did not print solid straight lines on the back once painted all the same, but with it being the back of the ornament and printed on the textured plate it is not noticable. I also added ironing to all top layers. Very nice print. Thanks! Bambu PLA-CF Black Bambu PLA Basic White Matterhackers PLA Build Red

(Edited)

@rstastny

Print Profile

0.2mm layer, 3 walls, 10% infill

Nice!

@cinnamonlake3d

Print Profile

0.2mm layer, 3 walls, 10% infill

printed perfectly. can wait to get the rest of it printed and hung up.

(Edited)

@hbtaylor0927

Print Profile

0.2mm layer, 3 walls, 10% infill

printed very nicely

@lilrepete

Print Profile

0.2mm layer, 3 walls, 10% infill

This was a perfect print, Everything single aspect of the print was perfectly calculated. I cannot believe I did not get a photo before I boxed it up to send to my young Grand-Daughter who lives in Alaska .....

(Edited)

@Galeico

Print Profile

0.2mm layer, 3 walls, 10% infill

Excelente archivo, es una pasada

@CB24

Print Profile

0.2mm layer, 3 walls, 10% infill

(Edited)

@vervecken.franc

Print Profile

0.2mm layer, 3 walls, 10% infill

@ROTORWERKZ

Print Profile

0.2mm layer, 3 walls, 10% infill

I printed this for my son, he’s a huge HP Nerd (I say that affectionately) and the print went well. it was my first 3 color print actually and while I admittedly have more to learn with a few settings, overall was fun to do for him