Skip to content

Layla Accessories Bundle for Cosplay - Genshin Impact - Instant Download STL Files for 3D Printing

Whole-Render-Layla-Accessories-Bundle.png Layla Accessories Bundle for Cosplay - Genshin Impact - Instant Download STL Files for 3D Printing
Outfit-Layla.png Layla Accessories Bundle for Cosplay - Genshin Impact - Instant Download STL Files for 3D Printing
2.png Layla Accessories Bundle for Cosplay - Genshin Impact - Instant Download STL Files for 3D Printing
3.png Layla Accessories Bundle for Cosplay - Genshin Impact - Instant Download STL Files for 3D Printing
4.png Layla Accessories Bundle for Cosplay - Genshin Impact - Instant Download STL Files for 3D Printing
5.png Layla Accessories Bundle for Cosplay - Genshin Impact - Instant Download STL Files for 3D Printing
6.png Layla Accessories Bundle for Cosplay - Genshin Impact - Instant Download STL Files for 3D Printing
7.png Layla Accessories Bundle for Cosplay - Genshin Impact - Instant Download STL Files for 3D Printing
Accessories-Bundle-End-Image.png Layla Accessories Bundle for Cosplay - Genshin Impact - Instant Download STL Files for 3D Printing
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 559 views
  • 1 download
  • 1 collection
License
3D design format
ZIP Folder details Close
  • Layla Accessories Bundle.zip
    • Part 10-1 - Star cloth accessories, star type 1.stl
    • Part 10-2 - Star cloth accessories, star type 1.stl
    • Part 10-3 - Star cloth accessories, star type 2.stl
    • Part 10-4 - Star cloth accessories, star type 2.stl
    • Part 10-5 - Star cloth accessories, star type 2.stl
    • Part 10-6 - Star cloth accessories, star type 2.stl
    • Part 1-1 - Star crown, crown base.stl
    • Part 11-1 - Right ankle accessory, band part 1.stl
    • Part 11-10 - Right ankle accessory, diamond 2.stl
    • Part 11-11 - Right ankle accessory, diamond 2.stl
    • Part 11-12 - Right ankle accessory, diamond 2.stl
    • Part 11-13 - Right ankle accessory, diamond 3.stl
    • Part 11-14 - Right ankle accessory, diamond 3.stl
    • Part 11-15 - Right ankle accessory, diamond 3.stl
    • Part 11-16 - Right ankle accessory, diamond 3.stl
    • Part 11-2 - Right ankle accessory, band part 2.stl
    • Part 11-3 - Right ankle accessory, slot in diamond.stl
    • Part 11-4 - Right ankle accessory, diamond 1.stl
    • Part 11-5 - Right ankle accessory, diamond 1.stl
    • Part 11-6 - Right ankle accessory, diamond 2.stl
    • Part 11-7 - Right ankle accessory, diamond 2.stl
    • Part 11-8 - Right ankle accessory, diamond 2.stl
    • Part 11-9 - Right ankle accessory, diamond 2.stl
    • Part 1-2 - Star crown, slot in snowflake emblem.stl
    • Part 12-1 - Left thigh band, band 1.stl
    • Part 12-2 - Left thigh band, band 2.stl
    • Part 12-3 - Left thigh band, slot in star 1.stl
    • Part 12-4 - Left thigh band, slot in star 2.stl
    • Part 12-5 - Left thigh band, slot in star 3.stl
    • Part 1-3 - Star crown, slot in star type 1.stl
    • Part 13-1 - Cryo sumeru vision, frame.stl
    • Part 13-2 - Cryo sumeru vision, core.stl
    • Part 1-4 - Star crown, slot in star type 1.stl
    • Part 1-5 - Star crown, slot in star type 2.stl
    • Part 1-6 - Star crown, slot in star type 2.stl
    • Part 1-7 - Star crown, slot in star type 2.stl
    • Part 1-8 - Star crown, slot in large star.stl
    • Part 1-9 - Star crown, slot in large star.stl
    • Part 2-1 - Neck accessories, choker part 1.stl
    • Part 2-2 - Neck accessories, choker part 2.stl
    • Part 2-3 - Neck accessories, piece 1.stl
    • Part 2-4 - Neck accessories, piece 2.stl
    • Part 2-5 - Neck accessories, piece 3.stl
    • Part 2-6 - Neck accessories, diamond type 1.stl
    • Part 2-7 - Neck accessories, diamond type 2.stl
    • Part 2-8 - Neck accessories, diamond type 2.stl
    • Part 2-9 - Neck accessories, slot in gem.stl
    • Part 3-1 - Torso accessories, triangle.stl
    • Part 3-10 - Torso accessories, arrow clip 1.stl
    • Part 3-11 - Torso accessories, arrow clip 2.stl
    • Part 3-12 - Torso accessories, arrow clip 2.stl
    • Part 3-13 - Torso accessories, cloth star.stl
    • Part 3-14 - Torso accessories, cloth accessory.stl
    • Part 3-15 - Torso accessories, cloth pin.stl
    • Part 3-2 - Torso accessories, back diamond.stl
    • Part 3-3 - Torso accessories, side diamond.stl
    • Part 3-4 - Torso accessories, side diamond.stl
    • Part 3-5 - Torso accessories, side diamond.stl
    • Part 3-6 - Torso accessories, side diamond.stl
    • Part 3-7 - Torso accessories, waist clip.stl
    • Part 3-8 - Torso accessories, waist clip.stl
    • Part 3-9 - Torso accessories, arrow clip 1.stl
    • Part 4-1 - Arm accessories, upper arm band.stl
    • Part 4-2 - Arm accessories, upper arm band.stl
    • Part 4-3 - Arm accessories, forearm band.stl
    • Part 4-4 - Arm accessories, forearm band.stl
    • Part 4-5 - Arm accessories, forearm band diamond.stl
    • Part 4-6 - Arm accessories, forearm band diamond.stl
    • Part 5-1 - Right wrist accessories, bracelet.stl
    • Part 5-2 - Right wrist accessories, large diamond.stl
    • Part 5-3 - Right wrist accessories, medium diamond.stl
    • Part 5-4 - Right wrist accessories, medium diamond.stl
    • Part 5-5 - Right wrist accessories, small diamond 1.stl
    • Part 5-6 - Right wrist accessories, small diamond 1.stl
    • Part 5-7 - Right wrist accessories, small diamond 2.stl
    • Part 6-1 - Left wrist accessories, bracelet.stl
    • Part 6-2 - Left wrist accessories, large diamond.stl
    • Part 6-3 - Left wrist accessories, medium diamond.stl
    • Part 6-4 - Left wrist accessories, medium diamond.stl
    • Part 6-5 - Left wrist accessories, small diamond.stl
    • Part 6-6 - Left wrist accessories, small diamond.stl
    • Part 6-7 - Left wrist accessories, small diamond.stl
    • Part 6-8 - Left wrist accessories, hanging piece 1.stl
    • Part 6-9 - Left wrist accessories, hanging piece 2.stl
    • Part 7-1 - Claws, finger claw.stl
    • Part 7-2 - Claws, finger claw.stl
    • Part 7-3 - Claws, finger claw.stl
    • Part 7-4 - Claws, finger claw.stl
    • Part 7-5 - Claws, thumb claw.stl
    • Part 7-6 - Claws, thumb claw.stl
    • Part 8-1 - Hair accessory.stl
    • Part 8-2 - Hair accessory.stl
    • Part 9-1 - Hat cone, cone part 1.stl
    • Part 9-2 - Hat cone, cone part 2.stl
    • Part 9-3 - Hat cone, gem.stl

Learn more about the formats
Publication date 2024-01-15 at 10:58
Design number 1713585
silvveri

silvveri

3D printer file info

3D model description

This is a fan made bundle of cosplay accessories based off of Layla's official art and in game model from Genshin Impact. All of my models are always made from scratch by me. If you would like just a handful of models from this bundle, please contact me so I can put together a mini bundle for you!

You will receive 1 zip folder that contains the 95 stl files:

  1. The star crown which comes separated as the crown base, the slot in snowflake emblem, 2 identical slot in star type 1, 3 identical star type 2 and 2 identical large slot in stars. The crown base is pre-separated into 2 parts that are designed to be glued together using their alignment pins as a guide.

  2. The neck accessories which comes separated as the **choker, piece 1, piece 2, piece 3, the diamond type 1, 2 identical diamond type 2 and the slot in gem. The choker is halved into 2 parts that are Not meant to be glued together but rather are designed to have connecting material, such as elastic and or velcro, glued within so that you can take it on and off with ease, each parts alignment pins will keep it aligned correctly and support the connecting material.

  3. The torso accessories which comes separated as the triangle, the back diamond, 4 identical side diamonds, 2 identical waist clips, 2 identical arrow clip 1, 2 identical arrow clip 2, the cloth diamond, the cloth accessory and the cloth pin. The cloth accessory has a 0.25cm slot that goes through the middle so that fabric or thin foam can slide through and be glued within.

  4. 2 identical sets of arm accessories which comes separated as the **upper arm band, the forearm band, and the forearm band diamond.

  5. The right wrist accessories which comes separated as the **bracelet, the large diamond, 2 identical medium diamonds, 2 identical small diamond 1 and small diamond 2.

  6. The left wrist accessories which comes separated as the **bracelet, the large diamond, 2 identical medium diamonds, 3 identical small diamonds, hanging piece 1 and hanging piece 2.

  7. The claws which come separated as 4 identical finger claws and 2 identical thumb claws.

  8. 2 identical hair accessories

  9. The hat cone which comes separated as the cone and the gem. The cone is separated into 2 parts, these parts do not have pins. Before gluing the cone together, simply place the finished gem model inside.

  10. 2 identical sets of star cloth accessories which comes separated as star type 1, 2 identical star type 2.

  11. The right ankle accessory which comes separated as the **band, the slot in diamond, 2 identical diamond 1, 7 identical diamond 2 and 4 identical diamond 3. The band is halved into 2 parts that are Not meant to be glued together but rather are designed to have connecting material, such as elastic and or velcro, glued within so that you can take it on and off with ease, each parts alignment pins will keep it aligned correctly and support the connecting material.

  12. The left thigh band which comes separated as **band 1, **band 2, slot in star 1, slot in star 2 and slot in star 3.

  13. The Sumeru Cryo vision which comes separated as the frame and core.

More Info for this Product:

**Please keep in mind that these pre-sized pieces in particular are generalised measurements and absolutely will not fit everyone and everybody type! I highly encourage you to measure yourself and resize and adjust these pieces accordingly!

Some things to consider:

. These models and split parts are designed to fit on a Prusa MK3S printer build volume of 25cm wide, 21cm deep, & 21cm high.

. The included models are scaled to fit a generalised 5'7" tall person. If you would like to resize to a different generalised height (such as 5'3" or 6'0"), and are not comfortable doing it yourself, please contact me so I can do it for you!

. I will be unable to provide the models in any file format other than .stl

. I typically provide the models in a default orientation which is often not at an optimal orientation to print considering various factors, please consider the orientation of the models and adjust them accordingly. If you would like some orientation tips, please contact me.

. Before printing your final parts, make sure to do a test print, double check that the generalised sizes are right for you and re-size if needed. If you decide to resize, make sure to scale all joining parts collectively so that they will fit together. If parts have features that rely on ultra precise measurements such as dowel slots, fabric slots, or magnet insets, please feel free to contact me if you'd like to resize them so that I can do it for you while maintaining the correct size of the feature.

. Models that are pre-split into parts will likely have some degree of seam line depending on how accurately your printer prints the joining edges of the models, the pins, and the voids, as well as material expansion. If you encounter this, I recommend using some sort of filler, such as epoxy putty, to fill in the seam line and then sand everything well for smooth results.

If you have any questions please do not hesitate to contact me!

Feel free to also drop pics of your cosplays, I'd love to see what you make!

Thanks for stopping by! I hope you enjoy!

3D printing settings

Designed for FDM and or resin printing

If FDM printing, I recommend trying out the Overture PLA Pro brand of filament. Its more robust and easier to sand than other PLA brands I've tried out, and typically prints very nicely.

General Filament Printer Settings Recommendation:
(Parameters have been tested to work well with Overture PLA Pro)

. A fine layer height of 0.1mm or less for a nice and smooth surface straight off of the print bed. (This helps to minimise time spent on post processing by sanding to obscure layer lines.)

. Organic/tree supports at 45% overhang threshold and 0.2 detachable top z contact distance. (Overall they are much better in my experience than default style supports; With organic/tree supports, surface detail is better retained, they are much easier to remove, minimal marks are left behind after removal, and they tend to use less filament.)

. Infill at around 5-10% gyroid for a more durable model, or 5-10% lightning for a more lightweight model.

. x2-3 walls at 0.8mm thickness for adequately durable model walls. (A model's main strength I find comes from the number of walls and not the infill density. This in conjunction with the infill setting chosen is very dependent on how brittle/impact resistant your filament is.)

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.