Retro Space Ork Battlewagon
Retro Space Ork Battlewagon
Published 2024-01-08T13:49:55+00:00
Another retro Space Ork vehicle for my wife's Rogue Trader and Second Edition Speed Freekz army.
This is a 28mm compatible interpretation of the old Epic Ork "Battlewagon" built from scratch in Tinkercad.
Also included are alternate wheels in the style of the Armorcast version of the Epic vehicle.
Designed for FDM printing, test model was printed in PLA at 0.12, 15% infill on a Creality CR6-SE. No supports should be required; smaller parts may need brims depending on how good your adhesion is.
Parts labelled with "x2" etc need to be printed that many times. The kit uses 5 short (15mm) and 4 long (30mm) pegs; these are the same as 6mm dowels which may be used instead. (I print the short ones but use wooden dowels for the long pegs). If you don't have dowels you can print the optional axle pegs instead - these are short pegs but have a stop in the middle so they won't disappear into the longer axle holes.
Date published | 08/01/2024 |
Support Free | YES |