Make All your herbs easy in the kitchen.

This planter ensures that your herbs stay fresh and hydrated.

If you dont yourself use fresh herbs, i know this will be a great gift for those who do.

The Design is made to be as simple as possible, and blend into any kitchen aesthetic.

There a two different patterns, because i could'nt decide witch i liked best.

So why not upload both of them :)

HOW IT WORKS

The self watering planter is designed to slowly absorb water from the reservoir (This needs to be filled up occasionally).

Its a one piece print (uni body) with a clear and visible water reservoir, so you dont need to lift a inner pot, or rely on a floater to tell you how much water is left.

Simply just look in the in the reservoir, and fill it up if needed.

There are 3 water inlets to the center, where it is recommended to use a wicking material at the bottom.

This helps to absorb water into the soil slowly. You can place a couple of cotton balls / cotton wool in the bottom of the pot.

I recommend filling wicking material so it is above the reservoir edge, then fill with soil, and your herb of choice.

The water inlets has a light slope towards the center, so all the water is utilized

UPDATE - I have added a funnel, for making it easier to 

fill soil in the planter, without spilling soil in the water reservoir.

Basic print settings:

• Infill : 10%
• Walls: 3
• Top/bottom shell layers: 3
• No support needed

Dimensions: Soil area has a diameter of 80 mm, and a total hight of 108 mm.