Fishing Reel Unspooler

Copyright Claim

Fishing Reel Unspooler

Boost
2
5
1
GIF

Print Profile(1)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1

0.28mm layer, 2 walls, 15% infill
0.28mm layer, 2 walls, 15% infill
Designer
1.4 h
2 plates
5.0(1)

Boost
2
5
1
0
16
14
Released

Description

Quickly replace your fishing line!
Un-spooler for fishing reel or anything else you need to unspool.
Fits on a drill or electric screwdriver.

New Version Available here: https://makerworld.com/en/models/470354#profileId-379848

 

Press-fit to assemble. Can be taken apart easily to slide off the line you spooled on it for storage or disposal.



General 3d Printing Tips

  • Make sure your printing plate is clean! Oils from your skin will cause adhesion issues for your prints. Regularly wash your print plate with a detergent like Dawn and avoid touching the surface when removing prints from the bed.
  • If it's an option on your printer, always opt to level the bed before each print. If you have to perform this manually, make sure you do this after every few prints. It takes a bit of time and patience, but it's a fair trade for reliable prints.
  • Ensure bed and nozzle temperatures are within the expected range for the material you are printing. Temperatures that are too high or too low will affect the print negatively by causing warping, malformed layers or adhesion issues.
  • Reduce your printing speed. Slower print speed is especially important for overhangs because it gives the material more time to cool as it's deposited.

Comment & Rating (1)

Please fill in your opinion
(0/5000)

Print Profile
0.28mm layer, 2 walls, 15% infill
1
Reply
No more