Epoxy Resin/Silicone Paddle for Drill by MNeilson

MNeilson

Tools>Hand Tools

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.16mm layer, 2 walls, 20% infill

Designer

2 h

1 plate

5.0(17)

Strength Profile, 0.2mm layer, 6 walls, 25% gyroid infill

1.1 h

1 plate

4.9(15)

0.2mm layer, 6 walls, 25% infill - Optimized for the A1 mini

1.5 h

1 plate

5.0(5)

Boost

307

502

423

253

Released

Description

6" long mixing paddle for epoxy resin and other 2 part blends. 6" long, with a ¼" drive that fits a drill or impact driver. Each paddle only costs less than 20 cents to print! I found the reusable ones to be annoying because they are hard to clean. I recommend printing at least 2 at a time to allow for cooling. Works well on my P1S, but parts like these would be difficult to print on a bed slinger. For a larger version, see my other model here! https://makerworld.com/en/models/423343?from=search#profileId-326520

Comment & Rating (51)

@TonightWePrint

Print Profile

Strength Profile, 0.2mm layer, 6 walls, 25% gyroid infill

OK very nice stir

The designer has replied

@Weisnetde.

Thanks for your review!

@Milicjovan

Boosted

Print Profile

0.16mm layer, 2 walls, 20% infill

perfect

The designer has replied

@markneilson10

thanks for printing and reviewing!

@davidsdesigns

Print Profile

Strength Profile, 0.2mm layer, 6 walls, 25% gyroid infill

Printed good, and works well! Used Bambu Basic PLA White

The designer has replied

@Weisnetde.

They look great! Thank you for your review!

@manolo.mancelli

Boosted

Print Profile

0.16mm layer, 2 walls, 20% infill

perfect

@emaxx620

Print Profile

Strength Profile, 0.2mm layer, 6 walls, 25% gyroid infill

Worked great for a table top epoxy project. I did change some parameters when printing such as raised the temp, and printed them solid. Took about 3h for the 6 with the settings I used. Used some Bambu PLA. Will print some more for future projects.