Sword on the Cob - The Retractable Corn Saber by Man of Mystery Intl.

Man of Mystery Intl.

Toys & Games>Other Toys & Games

GIF

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

Solid color - 0.16mm layer, 3 walls, 10% infill

Designer

22.7 h

2 plates

4.8(17)

Multicolor - 0.16mm layer, 3 walls, 10% infill

Designer

63.4 h

2 plates

Holder - 0.16mm layer, 3 walls, 10% infill

Designer

2.2 h

1 plate

Boost

258

335

437

105

Released

Description

So you wanna be a corn star?! You've come to the right place.

Easily expand your food weapon arsenal with this inconspicuous cob of corn concealing a roughly 30" saber blade for an overall length of around 38" from tip to tip when expanded!

The corny sword is the thing you've been waiting for every day since you heard about 3D printing swords.

All you need is 4- 6x3mm magnets to seamlessly connect the tip to the pommel.

The cap is designed with you in mind! For those who really like to fight and will end up breaking the blade, the blades are easily replacable! Just unscrew the corn cob cap and insert a new set of cob saber blades!

Printing can be done purely in single colors plates. However, if you're a big fan of peaches & cream corn, then there is a multicolor version just for you! Do note though, the print time is drastically increased and it's a huge waste of filament.. but I wont judge if that's your thing..

For more of my telescoping weapons, check these out:

The Karrotana: https://makerworld.com/en/models/148358

Banana Saber: https://makerworld.com/en/models/118301

The Pickle Sickle: https://makerworld.com/en/models/190877

7ft Bo Staff: https://makerworld.com/en/models/413159

Comment & Rating (30)

@user_1400572428

Print Profile

Solid color - 0.16mm layer, 3 walls, 10% infill

absolutely amazing veggie weapon. I’m looking forward to the personalized holder.

@metalclark15

this is a very fun print. made for a funny and catchy video. great design man. 🔥🙏

@Kady3DPrinting

My make 50% scale https://kady3dprinting.com/model/sword-on-the-cob---the-retractable-corn-saber https://youtube.com/shorts/ZkXkDj9RtnY?feature=share

@PHDinADHD

Print Profile

Solid color - 0.16mm layer, 3 walls, 10% infill

Very nice. I’m amused watching the blade print all at once too. worked great, fit well.

@tooling_lee

Boosted

Print Profile

Solid color - 0.16mm layer, 3 walls, 10% infill

@theghettosnowma

Print Profile

Solid color - 0.16mm layer, 3 walls, 10% infill

@theeightbitdad

Boosted

The sword part is not staying in the cob when fully extended. It worked a few time then started popping out the end.

The designer has replied

@theeightbitdad

Boosted

I slightly bent out the bottom of the biggest section to make it stay in but just a heads up.

@user_2001783493

Same issue, mine doesn't grip at all just falls right out. I ended up gluing the blade in. next one I think I'll try flaring the base with some applied heat. Might end up just remixing it and enlarging the end funnel.. or giving the cob itself a cone shape instead of being straight.

@ManofMysteryInt

Sorry that happened. The blades need to be printed with wall generator in classic. Arachne will reduce it to 2 walls per blade which changes the fit between blade pieces. Please print again with classic walls and double check in the slicer before printing that there are 3 walls per blade. Thanks!

@user_1400572428

any chance you could make a stand for this like the Karrotana and the Pickle Sickle?

The designer has replied

@ManofMysteryInt

definetely! it's on my to do list