1967 Ford Mustang “Eleanor” Wall Art. (hueforge) Version 2 is the Mustang from the movie “Gone in 60 Seconds”.
you can scale to any size you want, but make sure you don't change the “Z” axis height or it will throw off the color sequence.
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Sunlu Silver Transmission Distance: 2
PLA+ Sunlu Blue Transmission Distance: 4
PLA+ Sunlu Sky Blue Transmission Distance: 4
PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #10 (0.6mm) swap to Grey
At layer #12 (0.68mm) swap to Silver
At layer #16 (0.84mm) swap to Blue
At layer #22 (1.08mm) swap to Sky Blue
At layer #27 (1.28mm) swap to White
At layer #33 (1.52mm) swap to Black
At layer #46 (2.04mm) swap to Grey
At layer #52 (2.28mm) swap to Silver
At layer #60 (2.60mm) swap to Sky Blue
At layer #61 (2.64mm) swap to White for the rest.