This bracket was designed to mount a 40x40x10mm fan onto the SKR Pico board, compatible with RPI3, RPI4, RPI5.

Use 4 BHCS M3*14 screws and nuts to mount the fan on the bracket, and then install the bracket on the motherboard with M2.5 or M3 screws, the length of the screws should be determined according to your own needs.

If using the without spacer version, 4 additional solid metal M3x12mm or M2.5X12mm are required.

该支架设计用于将 40x40x10mm 风扇安装到 SKR Pico 板上，兼容 RPI3、RPI4、RPI5。

使用4颗半圆头M3*14螺丝及螺母将风扇固定在支架上，然后将支架通过 M2.5 或 M3 螺丝固定在主板上，螺丝长短请根据自己需求而定。

如果使用无柱版本，则需要 4 个额外的双通铜柱 M3x12mm 或 M2.5X12mm。