Print at 10% infill with a layer height of 0.2 mm with a base layer of 0.2 mm

Filaments Used:
PLA Violet
PLA Red
PLA Light blue
PLA Pink
PLA Yellow
PLA Light pink
PLA White
PLA Blue

Swap Instructions:
Start with Yellow
At layer #6 (1.20mm) swap to Blue
At layer #11 (2.20mm) swap to Light Blue
At layer #16 (3.20mm) swap to Violet
At layer #21 (4.20mm) swap to Pink
At layer #26 (5.20mm) swap to Yellow

At layer #31 (6.20mm) swap to Red

At layer #36 (7.20mm) swap to Orange.

At layer #36 (7.20mm) swap to Yellow for the rest.

Original size 200 mm x 200 mm x 9 mm

Frame: https://makerworld.com/en/models/402349#profileId-303962

Design for non-commercial prints only!!!