HARLEY QUINN STRIPPER VERSION - COLLECTIBLE RARE MODEL Free 3D print model

When you download you will have 27 Stl Files

1.Harley Quinn Figure 2.Harley Quinn Base 3.Full Body With Base 4.Harley Quinn Base ( No Pole Iron )

Disassembled Parts

1.Harley Head Disassembled 2.Harley Right Arm Harley Head Disassembled 3.Harley Left Arm Harley Head Disassembled 4.Harley Torso Harley Head Disassembled 5.Harley Hip Harley Head Disassembled 6.Harley Right Leg Harley Head Disassembled 7.Harley Left Leg Harley Head Disassembled 8.Harley Base Harley Head Disassembled 9.Pole Iron Base Part Mid Line Disassemvled 10.Pole Iron Base Part Upper Disassemvled 11.10.Pole Iron Base Part Disassemvled 12.Harley Head With Pole Iron Disassembled 13.Harley Hip With Pole Iron Disassembled

Sliced Flat Cut Parts

1.Harley Head Sliced Flat Cut 2.Harley Right Arm Sliced Flat Cut 3.Harley Left Arm Sliced Flat Cut 4.Harley Torso Sliced Flat Cut 5.Harley Hip Sliced Flat Cut 6.Harley Right Leg Sliced Flat Cut 7.Harley Left Leg Sliced Flat Cut 8.Harley Base Sliced Flat Cut 9.Pole Iron Base Part Mid Line Sliced Flat Cut 10.Pole Iron Base Part Upper Sliced Flat Cut 11.10.Pole Iron Base Part Sliced Flat Cut 12.Harley Head With Pole Iron Sliced Flat Cut 13.Harley Hip With Pole Iron Sliced Flat Cut

This product is Nuskul Art Collectible Edition. Designed using 3D Max and Zbrush. -It is a detailed product that can be easily printed.

Follow me for more models You can send me a message about the model or in general. You can also reach me via social media.

Print Temperature : : 200 Table Temperature : 60 Layer Height : 0.2 mm Intıal Layer Heigt : 0.2 mm Wall Line Count : 0.4 mm Fill Density : % 20

Support Stracture : Tree Maximum Branch Angle : 60 Branch Diameter : 3 Trunk Diameter : 16 Branch Diameter Angle : 5 Support Placement : Everywhere Prefferred Branch Angle : 25 Diameter İncrase to Model : 1 Minimum Height to Model : 3 Intial Layer Diameter : 6 Branch Destinty : 20 Tip Diameter : 0.8 Limit Branch Reach : Yes Optimal Branch Range : 30 Rest Preference : On Model if Required Support Overhang Angle : 55 Support Pattern : Gyroid Connect Support Lines : Yes Support Density : 5 Support Line Distance : 8 Intial Layer Support Line Distance :8 Support interface Thicknes : 1.2