Sheen

0.08mm layer, 2 walls, 100% infill

mr.fizzywater

ArtsyBigfoot01a_709b7b0b-ff1c-4b60-8a3d-f1f73e4f6c99.jpg

ArtsyBigfoot01b_851f6508-e788-4edd-9dd2-b937c0ea0175.jpg

ArtsyBigfoot01a_709b7b0b-ff1c-4b60-8a3d-f1f73e4f6c99.webp

ArtsyBigfoot01b_01b855fe-3901-4733-9a1c-611ea2fb78af.webp

plate_1.png

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:     PLA PolyTerra Charcoal Black Transmission Distance: 0.3     PLA Paramount 3D Steel Gray Transmission Distance: 2.5     PLA Paramount 3D Prototype Gray Transmission Distance: 3     PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions:     Start with Charcoal Black     At layer #6 (0.56mm) swap to Steel Gray     At layer #13 (1.12mm) swap to Prototype Gray     At layer #19 (1.6mm) swap to Jade White for the rest.

Original art by me with a little help from DALL-E

Artsy Bigfoot - HueForge

Global

Print Profile(1)

Description

Comment & Rating (2)

License

Related Models

hueforge cat humor

Bigfoot earrings

Four color clover

Grave Digger V2 Lithophane Panel