An adapter that allows you to mount two 2.5 hdd drives in one 3.5″ hdd drive bay.
Print Settings
Rafts: No
Supports: No
Notes:
ABS, Nozzle 0.6, Layer 0.3 After printing, peel the holes in the bridges for fixing 2.5 discs. You do not need to enable bridge settings when printing. Standard screws are used for attachment. Discs up to 9 mm thick may be installed. One of the 2.5″ disks can be moved forward by 25 mm, this may be necessary if there is little space in the computer case.
Credits:
Ivan_Drago