Imperial Snowtrooper grunt armor for sixth scale custom figure 3D print model

Purchase of this model grants you ability to sell physical prints. You may not sell or otherwise distribute the digital files.

This kit contains all the armor parts needed to make a custom 1:6 Snowtrooper grunt figure to go with your Hot Toys or Sideshow Star Wars figures

This kit contains:

Helmets: there are 4 key versions of the helmet featuring a wide face cover version, a narrow face cover version, a version with the hard parts only for using with real fabric face covers and a version with only the tope helmet and goggles. All variations come in hollow helmet versions along with a head peg version that has a socket for the included neck mounting peg sockets to be glued into. The peg version has the wide face cover, narrow face cover and hard parts only section as separate pieces that can be glued into the main helmet. This makes glueing real fabric to the hard parts only section easier as the fabric can then be under the goggles. The socket parts come in tall and short options to help get the helmet height right on your chosen body and will need to be printed in flex resin to avoid the socket plugs from cracking. I also included a helmet top without the face mask to add extra option for you as well as the dummy neck post which I included simply for reference.

Chestplate in 3 versions: Movie style, Sideshow styled and Kenner (90's POTF2 12 inch figure) details style.

Backpack: Movie style one piece

Shoulders: straps and shoulder pads left and right

Merged upper torso's: multiple options of the chest, straps and back joined as one piece.

Arms: vembraces left and right in multiple options (my original first attempt versions, standard versions, large cuff versions for thicker arms, top plate only versions with separate standard and large cuff parts and finally hand plates left and right.

Lower torso: Belly plate, codpiece and finally thermal detonator in 2 versions, flat backed for glue and hook on version for hanging on fabric belts.

Knees left and right.

This kit is scaled for 1:6 figures (12 inch sized figures) and is intended for resin printing.

STL format for resin 3D printing