Carl Up high adventures

Capture the whimsical essence of Pixar's beloved character with this intricately designed Funko STL model of Carl from the animated masterpiece 'Up.' Crafted with meticulous attention to detail, this digital replica encapsulates Carl's endearing charm and adventurous spirit. From his iconic spectacles to the meticulous wrinkles on his weathered face, every aspect is faithfully recreated, making it a must-have for fans of the film. Whether displayed proudly on a shelf or incorporated into digital artwork, this STL model brings the heartwarming magic of 'Up' into your world.

Object Size: The Funko STL model of Carl from "Up" is designed to be approximately 10 centimeters (4 inches) in height. This size ensures it's suitable for display while preserving intricate details.

Printing Time: The estimated printing time for this model may vary depending on your 3D printer's settings and capabilities. However, with standard settings, it may take approximately 6-8 hours to print.

Infill: The recommended infill for this model is around 20-25%. This level of infill provides sufficient structural support while minimizing material usage.

Layer Height: It's recommended to use a layer height of 0.2mm for optimal print quality. This layer height strikes a balance between printing time and detail resolution.

Printing Technology: This model is suitable for both FDM (Fused Deposition Modeling) and resin 3D printing technologies. For FDM printing, ensure your printer is capable of handling small details effectively. For resin printing, adjust the support structures accordingly to prevent deformations during printing.

Supports: Supports may be required, particularly for overhangs such as Carl's arms and hat. Generate supports as needed based on your slicing software's recommendations to ensure accurate and clean printing.