WWII Tie Fighter Take Off from Air Craft Carrier
WWII Tie Fighter Take Off from Air Craft Carrier
Print Profile(1)
Description
This is another Star Wars take on photo from WORLD WAR II. This is a Tie Fighter taking off from an Aircraft Carrier. This print is roughly 164x180mm. Again I use all Bambu Colors for my prints, but you are not limited to the colors I use.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue Gray
At layer #15 (1.28mm) swap to Ash Gray
At layer #19 (1.6mm) swap to White for the rest.
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
