Description:
This stand is specifically designed for the Oral-B electric toothbrush Type:3757 charger and brush head holder. The brush head supports two types: IO and EB series. Assembly is simple, just place the Voronoi support board on the base and align it.
The base comes in three versions: 1.without legs, and 2. with a reserved hole for attaching silicone pads like mine, with a diameter of 11.5mm.
Assembly:
Simply place the Voronoi support board on the base and align it.
Features:
The support board is designed with Voronoi perforations, allowing water to drip down to the base. The base has a sloped design to guide water out of the perforations, keeping the stand dry and clean.
說明:
此支架專為歐樂B電動牙刷的Type:3757充電器及刷頭放置架設計。刷頭提供兩種IO係列與EB係列。
底座有2種版本 1.無腳 2.像我一樣黏上矽膠墊子的預留孔,此孔直徑11.5mm
組裝:
將voronoi支架版子放置於底座卡準上即可。
特色:
支架版子以voronoi孔洞造型設計,可使水滴下至底座,底座具有傾斜設計,讓水順利排出孔洞,保持支架乾燥清潔。
使用 Fusion360設計
*Suggested: Place the base as depicted in the diagram to minimize the visibility of sloping layer lines and decrease the likelihood of water droplet residue
*建議:底座如下圖放置避免斜坡層紋路明顯已減少水珠殘留的機會
If you have any questions please leave a message and tell me
有任何問題請留言告訴我