Print at 100% infill with a layer height of 0.16mm with a base layer of 0.16mm
Filaments Used:
PLA Black Transmission Distance: 0.6
PLA Red Transmission Distance: 4
PLA Gray Transmission Distance: 3
PLA Light Gray Transmission Distance: 1.5
PLA White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (1.12mm) swap to Red
At layer #8 (1.28mm) swap to Blue Gray
At layer #9 (1.44mm) swap to Ash Gray
At layer #12 (1.92mm) swap to Jade White for the rest.
Frame: https://makerworld.com/en/models/209367#profileId-229295
Original size: 200 mm x 200 mm.