I took the original splash art from Metal Gear Solid 1 for PlayStation, this is Solid Snake in the Codec frame during a call.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Esun Pine Green Transmission Distance: 1.2
PLA BambuLab Basic BambuLab Green Transmission Distance: 8
PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Pine Green
At layer #9 (0.8mm) swap to BambuLab Green
At layer #11 (0.96mm) swap to White for the rest.
Enjoy!